Mowers     Decks     Attachments     Implements

Financing Options

Model MB

Large Homeowner or Light Commercial Use

This "no-nonsense" design results in a compact machine that can easily maneuver into tight areas and small spaces and make a quick exit with no loss of motion.

• 18-HP Briggs & Stratton Vanguard twin-cylinder engine
• Independent HydroGear® transaxles
• Remote air intake for increased engine life
• Belt tightener clutch/band brake
• Keyed PTO drive shaft
• Full size garden tractor battery
• 2.8 gallon fuel tank

Or another setup

• 18-HP Kohler Command twin-cylinder engine
• Independent HydroGear® transaxles
• Belt tightener clutch/band brake
• Splined PTO drive shaft with Quick Disconnect Coupler
• Full size garden tractor battery
• 2.8 gallon fuel tank

More information and specs 

return to top

Model Super MB

Commercial & Institutional Use 

• 26-HP Kohler Command EFI Air-Cooled Engine
• Cummins Filtration OptiAir™ remote air filter for extended engine life
• Lever-actuated PTO uses mechanical clutch/brake for mower blades
• Dual 4.7 gallon fuel tanks

Or another setup

• 27-HP Kohler Command Air-Cooled engine
• Cummins Filtration OptiAir™ remote air filter for extended engine life
• Lever-actuated PTO uses mechanical clutch/brake for mower blades
• Dual 4.7 gallon fuel tanks

  More information and specs 

Model MC

Commercial & Institutional Use

Lightweight frame with powerful engine gives agility, maneuverability, and high-mowing capacity to this model.

• 20-HP Kohler V-Twin engine 
• Manual PTO clutch and brake 
• Remote air intake 
• Dual hydro-axle 
• 10 bushel catcher with GHS option  

• 10.5-inch GHS Blower

• 56-inch maximum cutting width

More information and specs 

return to top

Model MD

Water-Cooled Diesel Engine for Long Life and Economy

Installing a top-of-the-line Kubota tractor engine is the ultimate machine for long life and the fuel economy of a diesel engine.

• 20.9-hp Kubota water-cooled, three-cylinder diesel engine
•  Electric radiator fan with reversible self-cleaning action
• Clam-shell style body and chassis to accommodate higher horsepower engine
• Shock-mounted instrument panel with warning lights and horn; also includes
ignition switch, light switch (opt), water temp gauge, voltmeter, and hourmeter
• 10.0 bu. catcher and 10.5” blower on GHS Models
• Grammer suspension seat w/ armrests
• Dual tail wheels for extra flotation
• 4.7-gallon fuel tank
• Remote air intake for engine
• Splined PTO drive shaft with Quick-Disconnect Coupler
• High capacity electrical system (40-amp charge)
• 5 MPH ground speed (6.5 w/ Speed-Up Kit)

More information and specs 

return to top

Model MT

For The Mowing Maintenance Professional

Popular with the lawn maintenance professional, the Model T offers the perfect balance of power, agility, durability and versatility for a wide range of mowing applications.  Four engine options and the ability to handle all of the deck sizes and attachments lets the owner equip the Model T to fit their job.

• 23-HP Kohler OHV V-Twin engine 
• Optional 26-HP Electronic Fuel Injection (EFI) high performance package

 •Optional 31-HP Liquid-Cooled, Electronic Fuel Injection (EFI) high performance package 
• Remote air intake 
• Shock mounted instrument panel with warning lights and horn,also includes ignition switch,light switch(opt),  voltmeter and hourmeter 
• Manual PTO clutch and brake 
• Dual hydro-axle 
• 10 bushel catcher with GHS option  

• 10.5-inch GHS Blower
• Handles all decks 
• Dual tail wheels (extra flotation) 
• Splined PTO drive shaft speeds deck installation 

More information and specs 

return to top

Model MW

A Walk Behind For The Mowing Maintenance Professional

This compact, mid-size walk-behind mower incorporates a unique balance of maneuverability, ease of use and functionality to mow any property like the time-proven Walker Rider.

• 15-HP, Kawasaki OHV V-Twin Engine with electric start
• Dual, independent HydroGear® integrated transaxles
• Variable forward speed controlled by rocker switch near right thumb, used in conjunction with pistol grips to achieve true zero-turn and nearly effortless maneuvering
• Tilt-up deck feature

More information and specs 

return to top

Interchangeable Mower Deck

All mower decks will fit on all of the tractors.  However, the GHS decks will not function on SD tractors and, obviously, large decks do not work well on lower horsepower tractors.  Interchangeable decks offer extra seasonal use or multiple mowing applications for the Walker.  Each deck is designed specifically for optimum performance in the collection, mulch or side-discharge configuration.

Tilt-Up Deck

Easy deck cleaning and underside maintenance are offered by the tilt-up deck (standard on all decks). A hinged deck carrier frame, large retractable handle on deck front and roller wheels on the back provide quick, easy tilt-up of the deck assembly. One person can tilt the deck up and then lower it to the normal operating position in less than 15 seconds. For safety, the cutter blades are automatically locked and cannot be operated in the tilt-up position. A retrofit kit is available to install the tilt-up option on earlier models with 36", 42", 48" or 54" decks.

return to top

Boom Sprayer Attachment

If there is mowing, there usually is a need for spraying. The Boom Sprayer easily mounts on all 42" and larger decks and offers a 96" spray pattern. A spray gun with a 20-ft hose and adjustable spray tip allow the operator to spray a mist or adjust to a 35-ft stream. The 25-gallon tank contains a sump that allows easy cleaning of the tank and spray system. Note: Mounting to the 52- and 62-inch carrier frames requires ordering two P/N B037 Rear Sprayer Supports.

return to top

Curb Jumper Ramp

Molded polypropylene, 40-inch wide curb ramp allows all Walker models to easily back over a standard curb for access to curbed areas. And when not in use, the ramp stows on the 42- and 48-inch decks as an expanded footrest. In fact, some customers report the footrest function is more important to them than the ramp. Designed with molded handle for easy lifting and carrying.

return to top

40" Spring Tine Dethatcher

A favorite tool for spring clean up, the Dethatcher easily clips on the front of 36-, 42- or 48-inch decks without fasteners or tools. When used with the GHS vacuum, lawn thatch and debris are removed and collected in one pass. A lift lever with foot trigger raises and lowers the dethatcher.

return to top

Quick-Change Implement Hitch System

Five implements mount interchangeably on the Walker tractor using the quick-change hitch system. The hitch assembly replaces the mower deck and installs on the tractor in less than a minute. Implements then slide onto the hitch and lock in place with the flip of a lever for true “quick change” capability. The hitch assembly also includes operator footrests and an electric power lift - just the touch of a switch raises and lowers implements. The lift control switch is quadrant mounted on the Forward Speed Control lever for convenient operation. 

return to top

Dozer Blade

The 46-inch Dozer Blade with five-angle positioning and spring trip action is useful for moving snow, loose dirt, and gravel.

return to top

42" Two-Stage Snowblower

The powerful, high production, two-stage 42” snow blower throws snow up to 40 feet and is recommended for Model MD and MT tractors. Quick, easy operation is enhanced by power lift (hitch system) and adjusting the discharge spout 180° from the operator seat. Optional Operator Soft-Cab is recommended to offer all-weather capability with the snow blower. Tail weight recommended.

return to top

13 ½" Debris Blower

The 13 ½" debris blower delivers 125-MPH velocity with a 230° manual direction control. Useful for landscape clean up and leaf removal. Tail weight recommended.
Requires Implement Hitch

return to top

Rotary Broom

A rotary broom with 47-inch sweeping path and five-position angle head is ideal for lawn dethatching and raking, and for sweeping debris or light snow on hard surfaces. In addition to dethatching turf, the broom does a great job of sweeping and removing gravel and debris from turf along roads, paths, and playing fields.
Down pressure is spring weighted and is adjustable for best sweeping action and minimum brush wear. Includes parking stands to protect bristles when not in use. Optional gauge wheels recommended for lawn dethatching to control depth of engagement. Tail weight recommended.
Requires Implement Hitch

return to top

BedShaper® Attachment for Walker Mowers

Loader Bucket

A versatile tool for landscaping work, the loader bucket will push, scoop, haul and grade dirt, gravel and mulch. Lifts approximately 180-lbs and 2-1/4 cubic feet of material with 14" ground clearance for transport. Bucket has a high-strength steel cutting edge and tilting action uses a 500-lb electric ram.

return to top

For more detailed information on these and other available products please go to: www.walkermowers.com